DescriptionCenturion D20 Smart Sliding gate motor Technical SpecificationsInput voltage90V – 240V AC /-10% @ 50Hz 1Current consumption (Mains)250mABattery charger current output1.8A @ 27.4V /-1%Maximum number of operations per day750. 2, 5Duty cycle – Mains present 2, 345%Motor voltage24V DCMotor power supplyBattery-driven (Standard Capacity – 2x 7.2Ah)3Current consumption (motor at rated load)9AInput / Output sink currents (Max accessory current draw)I/O 1-4100mA (12/24V)I/O 5 and 63A (12/24V) 10sec PulseMotor push force – starting52kgfMotor push force – rated39kgfGate mass – maximum2000kgGate length – maximum25mGate speed (varies with load) 2, 5Up to 18m/min 3Manual OverrideLockable lever with key releaseDrive Pinion13T Module 4Operations in standby with 2x 7.2Ah batteriesPower Saving (15m/min 20kgf) | Normal (18m/min 20kgf)Half day 2, 3, 4101 | 55Full day 2, 3, 480 | 45Collision SensingElectronicOperating temperature range-15°C to 50°COnboard receiver typeCENTURION rolling code (Keelog encryption) multichannelReceiver code storage capacity1500 Remotes6Receiver frequency433.92MHzDegree of protectionIP54Mass of unit packed (with standard kit, but excl. rack and battery)13KgPackaging dimensions (with standard kit, but excl. rack and battery)350mm wide x 282mm deep x 470mm highCan operate off a solar supplyBased on 25°C ambient temperature and unit not in direct sunlightBased on a motor push force of less than 50% of rated (Starting and Running forces)Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installationsCan increase battery capacity for longer standby timesBased on 4m gate, excluding all accessoriesMultiple buttons per remote can be used D20-SMART Brochure (962kB)D20-SMART Installation Manual (5.6MB)D20-SMART Quick Guide (1.3MB)D10, D10 TURBO & D20 SMART THEFT DETERRENT CAGE (not included)
