No products in the cart.
Specification Downlight, IP65, Class I – Protection against mechanical impact IK10 on body and IK07 on optical part. – High-pressure Die Cast Aluminium alloy body and components. – Extruded Aluminium S6063 alloy body with low copper content. – Nano Ceramic surface conversion, resistant to corrosive environment. – Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C. – Impact resistant safety tempered glass cover, withstand the temperature up to 250°C. – High performance metallized reflector from Ledil – Finland. – Post-cured treated silicone gasket. Temperature and weather resistant -40°C to 200°C. – External screws are in stainless steel with protection dipping. – Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter. – High efficiency LED module in COB technology from Citizen – Japan. Assembled on MCPCB and mounted on to heat conductive material. – High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard. – Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40°C to 180°C. – Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm². VDE approved. – Class1 luminaire provided with the earth connection. – Caution Installation work has to be carried on according to the enclosed installation manual.
