No products in the cart.
Specification Inground uplight, IP67, Class I – High-pressure Die Cast Aluminium alloy body and components. – Extruded Aluminium S6063 alloy body with low copper content. – Coating Process Nano Ceramic surface conversion, resistant to corrosive environment. – Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C. – Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C. – Glass flushes to the front cover, no accumulation of dust and water. – Molded PC lens from renowned manufacturers in various light distribution patterns. – Weather resistant silicone gasket. Working temperature -40°C to 200°C. – External screws are in stainless steel with protection dipping. – High efficiency LED module utilized Philips Lumiled chips. Assembled on MCPCB and mounted on to heat conductive material. – The whole systems tested to be operated under maximum ambient environment up to 40°C. – High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard. – Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40°C to 180°C. – Terminal Block/ Connector Class1 luminaire provided with the earth connection. – Pre-wired cable Pre-wired with 3×1.0mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved. – Equipped with anti-humidity kit. – Installation work has to be carried on according to the enclosed installation manual. – The water drainage system must be tested to ensure that it is sufficiency and efficiency.
